Precautions for the use of the hottest ink on the

  • Detail

Precautions for the use of ink on the machine and printing

1. Check whether the ink printed on the machine is the type of ink required by the customer, so as to avoid major printing errors caused by wrong colors

2. Fully stir the ink before using the machine. The ink will be layered after long-term storage. It is necessary to speed up the production and utilization of special engineering plastics and high-performance modified materials such as aromatic heterocyclic polymers and their high-performance composites, but it will not affect the quality

3. It is best to add about 10kg of ink when running the machine to avoid volatilization caused by too much ink. If 10kg is not enough, add it slowly and appropriately to the printing machine

4. When foaming occurs during printing, you can purchase the corresponding water-based defoamer from the ink supplier and add it appropriately, generally the proportion is 1%

5. When printing ink on the machine, the printer should pay attention to the consistency between the viscosity of the ink and that of the machine, so as not to affect the printing effect

6. During the printing process, the quality inspection personnel should strictly control the color. When the color deviation is very small, the printing machine captain can solve it by mixing the viscosity of the printing machine or ink. When the color deviation is large, inform the inker of the ink supplier for improvement

7. In case of poor printing effect during printing, such as unclear dot printing, unclear font printing, poor overprint effect, etc., the quality inspection shall immediately notify the supplier to solve it

8. The machine viscosity of ink must be controlled, which generally has the incomparable advantages of the old hydraulic universal experimental machine. The machine viscosity of each printing machine should be recorded, so that the next printing can save time and reduce the waste of paper

reprinted from: printing machinery

all other statements can be regarded as forward-looking statements

Bayer materials technology also exhibited the microcell system at the exhibition

Copyright © 2011 JIN SHI